NEC LCD1711M Скачать руководство пользователя страница 21

Страница: 21 / 73

1-18

1. Use the attached specified cable with the LCD1711M color monitor so as

not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC compliance

(2) Please use the supplied AC Adapter.

(3) Please use the supplied Audio Cable.

(4) Please use the supplied VGA Cable.

Use of other cables and adapters may cause interference with radio and

television receiption.

2. This equipment has been tested and found to comply with thie limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installtion. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular install-

ation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/tele-

vision technician for additional suggestions. The user may find the following

booklet, prepared by the Federal Communications Commission, helpful:

How to Identify and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office, Washington, D.C., 20402,

Stock No. 004-000-00345-4.

FCC Information

LCD1711M

- 84

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the

following two conditions. (1) This device may not cuase harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Type of Product:

Display Monitor

Equipment Classification:

Class B peripheral

Model:

LCD1711M

we hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules.

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC

Corporation.

NERGY

TAR

is a U.S. registered trademark. All other brands and product names

are trademarks or registered trademarks of their respective owners.
As an

NERGY

TAR

partner, NEC-Mitsubishi Electronics Display of America has determined

that this product meets the Energy Star guidelenes for energy efficiency. The

NERGY

TAR

emblem

does not represent EPA endorsement of any product or service.

U.S. Responsible Party:

NEC-Mitsubishi Electronics Display of America, Inc.

Address:

1250 North Arlington Heights Road, Suite 500

Itasca, Illinois 60143-1248

Tel. No.:

(630) 467-3000

Содержание LCD1711M










































































Результаты поиска

Содержание LCD1711M

Отзывы:

NEC LCD1711M, Руководство по обслуживанию, Страница: 21 / 73

Результаты поиска

Содержание LCD1711M

Отзывы: