NEC L1510PLF, Руководство пользователя

Страница: 5 / 68

Quick Start
To attach your MultiSync
®
LCD monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable
to the connector of the display card in your system (Figure A.1) . Tighten all screws.
For the Mac: Connect the MultiSync Macintosh cable adapter to the computer
(Figure B.1)
. Attach the 15-pin mini D-SUB end of the appropriate signal cable to
the MultiSync Macintosh cable adapter (Figure B.1) . Tighten all screws.
NOTE: To obtain the MultiSync Macintosh cable adapter, call NEC Technologies
at (800) 820-1230.
3. Connect the 15-pin mini D␣ SUB of the video signal cable and the AC Adapter cable.
Place the AC Adapter cable under Clip A (Figure C.1) .
NOTE: Incorrect cable connections may result in irregular operation, damage
display quality/components of LCD module and/or shorten the module’s life.
4. Connect one end of the power cord to the AC Adapter and the other end to the power
outlet (Figure D.1) .
5. Turn on the monitor (Figure E.1) and the computer.
6. To complete the setup of your MultiSync LCD monitor:
A. Set the resolution to 1024 x768 @ 75 Hz.
NOTE: For download information on the Windows
®
95/98 INF file for your MultiSync
LCD monitor, refer to the References section of this User’s Manual.
B. Use the following OSM
™
controls:
• Auto Adjust Contrast
• Auto Adjust
NOTE: Manual adjustment of the H/V Position and Image Adjust H. Size/Fine
controls may be required to complete setup of your MultiSync monitor.
For a full description of these OSM controls, refer to the Controls section of
this User’s Manual.
7. Refer to User’s Manual in the Pivot
®
Software CD case for installation and operation of this
software.
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User’s Manual.
3
78134702.wpc 8/20/99, 10:46 AM 5