K0RE81 Evaluation Platform for
µ
PD78F9882
1. INTRODUCTION
To facilitate design with an NEC Electronics flash microcontroller, a specific device, along
with appropriate crystals and reset circuitry is provided on a printed circuit board. All of the
package pins are brought out to standard 0.1-inch headers that surround the microcontroller
package on all four sides.
The K0RE81 board employs the µPD78F9882 flash microcontroller, which is identical to the
µPD789881 mask ROM version, except that it does not exhibit the same ultra-low-power
performance. A design therefore would be implemented in the K0RE81 board via the
µPD78F9882, and the code and operation thoroughly debugged before committing to mask
ROM release.
Table 1.
µPD789881
/
µPD78F9882 Comparison
µPD789881 µPD78F9882
Ultra-low power operation, I
DD4
<0.9 µa typ.
Ultra-low-power operation not available
16 KB mask ROM
32 KB flash memory
26 x 4 LCD controller
26 x 4 LCD controller
Four timer channels
Four timer channels
One serial UART channel
One serial UART channel
28 I/O ports (four N-channel open drain)
28 I/O ports (four N-channel open drain)
Pull-up resistors on open-drain port (mask option)
No pull-up resistors on open-drain port
On-chip multiplier: 8 x 8 = 16 bits
On-chip multiplier: 8 x 8 = 16 bits
On-chip voltage divider and regulator
On-chip voltage divider and regulator
5
Содержание K0RE81
Страница 2: ...K0RE81 Evaluation Platform for µPD78F9882 2 ...
Страница 4: ...K0RE81 Evaluation Platform for µPD78F9882 4 ...