NEC iS8-2K, Руководство пользователя

Страница: 31 / 69

15
Installation and Connection
Installation Instructions
1. Open and attach the ferrite clamp core to the supplied BNC 75 ohm
cable as close as possible to the end that goes to the projector.
* Push the catch to open the ferrite clamp core.
2. Close the ferrite clamp core tightly.
3. Fix the supplied band to the signal cable as a stopper.
* Pull the end of the band to tighten it. Cut off the surplus of the
band.
2-3. Connecting the various control terminals
For control, your projector comes with such ports as the USB ports (type A/type B), the PC control
terminal and the Ethernet port (RJ-45).
•
USB port (Type A) (USB A) ........................ For future extension.
•
USB port (Type B) (USB B) ........................ Use this port when controlling the projector in USB
connection from a PC.
•
PC control terminal (PC CONTROL) .......... Use this terminal when controlling the projector in
serial connection from a PC.
•
Ethernet port (LAN1, LAN2) ...................... Use this port when controlling the projector in LAN
connection from a PC.
NOTE: Be sure to use the ferrite clamp core
at the end of the BNC 75 ohm cable.
USB cable
LAN cable
RS-232C