2
3
▼
Mounting Procedure
Follow the steps below to attach the IP3NA-BCH ADAPTER( ) to the bottom-unit connector on the back
of the multifunctional telephone. If the telephone is furnished with various cables, remove these cables
first.
1
Turn over the telephone.
2
Lower the tilt legs to the first level.
3
Release lugs a and b on the stopper
from grooves A and B in the tilt legs
and widen the tilt legs.
4
Remove the connector cover (rubber)
from the bottom unit connector.
5
Position the IP3NA-BCH ADAPTER( )
with its lower claws, and then attach it
to the telephone connector while push-
ing the right and left claws.
The upper claw clicks.
6
Replace the tilt legs in original position.
The installation of the IP3NA-BCH ADAPTER( ) is complete.
▼
Pairing a Bluetooth
®
Device with a Multifunctional Telephone with Each Other
Invoke the Bluetooth
®
screen from a multifunctional telephone menu and register the Bluetooth
®
head-
set with the IP3NA-BCH ADAPTER( ).
For more details on working with the menu, refer to the user
'
s guide or other documentation that comes
with your system.
< Invoking the Bluetooth
®
Device Setup Screen >
Invoke the Bluetooth
®
screen in one of the following methods:
◆
Digital multifunctional telephone
・
If the IP3NA-BCH ADAPTER( ) is connected to an Aspire X:
Press menu keys
>
[5. Optional Devices]
>
[1. Bluetooth].
・
If the IP3NA-BCH ADAPTER( ) is connected to a PBX (other than Aspire X):
Press menu keys
>
[3. Setup]
>
[5. Optional Devices]
>
[1. Bluetooth].
<Entering a PIN Code>
In pairing a Bluetooth
®
device having a PIN Code other than 0000, enter a string of 4 to 16 digits to suit
that device.
<Pairing>
Up to 8 Bluetooth
®
devices located around the IP3NA-BCH ADAPTER( ) are located, among which
select a device want to pair with the device.
<Connecting to the Paired Device>
Enable the Bluetooth
®
device. Select [2. Enable] in the connection screen.
・
Only one IP3NA-BCH ADAPTER( ) can be mounted per telephone.
・
The IP3NA-BCH ADAPTER( ) cannot be mounted on the economy multifunctional telephone (IP3NA-
2TH TEL(BK)) and the cordless terminal (IP3NA-12TXH(BT) TEL(BK)).
Removing the IP3NA-BCH ADAPTER( )
Lift the IP3NA-BCH ADAPTER( ) from the upper claw while pressing the upper claw and the right and left
claws.
Caution
a
A
B
b
Tilt leg
Stopper
Multifunctional
telephone
Connector cover
Multifunctional
telephone
BHA-L UNIT
Right claw
Left claw
Lower claws
Upper claw
T i p s
After pairing a Bluetooth
®
device, be sure to configure its connection to enable it. If connected setting is
not done,the Bluetooth
®
device that does the pairing cannot be used.
=$NWGVQQVJ?
2CKTKPI/QFG
8KUKDKNKV[
ĉĊ$CEM1-
Ĵ
ĵ
ĵ
Ĵ
=2CKTKPI/QFG?
2CKTKPI
2+0%QFG
ĉĊ$CEM1-
Ĵ
=2+0%QFG?
2+0%QFG!
$-$CEM1-
=2CKTKPI?
$NWGVQQVJ*GCFUGV
ĉĊ$CEM1-
Ĵ
=2CKTKPI?
ĉĊ$CEM1-
Ĵ
Ĵ
ĵ
=$NWGVQQVJ*GCFUGV?
CCDDEEFFGGHH
ĉĊ$CEM1-
=$NWGVQQVJ?
2CKTKPI/QFG
8KUKDKNKV[
ĉĊ$CEM1-
Ĵ
ĵ
Ĵ
ĵ
=2CKTKPI/QFG?
2CKTKPI
2+0%QFG
ĉĊ$CEM1-
Ĵ
Ĵ
Ĵ
Ĵ
Ĵ
It takes approximately one
minute for locating.
=2CKTKPI?
ĉĊ$CEM1-
Ĵ
Ĵ
ĵ
=$NWGVQQVJ*GCFUGV?
&GNGVG
%QPPGEV
ĉĊ$CEM1-
Ĵ
ĵ
=%QPPGEV?
&KUCDNG
'PCDNG
ĉĊ$CEM1-
Ĵ
ĵ
ĵ
Caution
