NEC IE-780948-NS-EM4 Скачать руководство пользователя страница 56

Страница: 56 / 72

IE-78K0-NS-P04, IE-780948-NS-EM4

4.2 Differences in Port Functions

(1) Port 13 and 14 of the device are normal CMOS inputs with no hysteresis. The emulator has pins with

hysteresis.

(2) The LCD-segment signals S0-S39 are input/output ports of type 17A/17B at the device. The emulator

drives these signals by an analog switch.

4.3 Differences in SFR-Registers

Caution: 1. The emulator has a register to emulate the powerfail detection which is not existing

at the real chip. The name of the register is DAM0 (SFR-Adr: 0xFF9C). This register

has to be set to the value 0x01 by the user program.

2. The emulator has a register for the emulation of the LCD-function. The name of the

register is LCDTM (SFR-Adr: 0xFF4A). This register has to be set to the value 0x02 by

the user program.

4.4 Target Interface Circuit

The purpose of the target interface circuit is to have the same operations as the target device performed

in the IE-78K0-NS-A. It comprises the emulation device and various dates (CMOS, TTL and othes ICs).

When debugging is performed with the target system connected to the IE-78K0-NS-A, the IE-

78K0-NS-A target interface circuit performes emulation as though the actual target device were operating

in the target system.

The target device has a CMOS LSI configuration. The target interface circuit emulator device also has

a CMOS LSI configuration, and is virtually identical to the target device in terms of DC characteristics and

AC characteristics (when operating on V

= 4.0 to 5.5 V).

However, where emulation device signal input/output is performed via gates in the target interface circuit,

DC and AC characteristics differ from those of the target device.

In particular, regarding AC characteristics, there is a date delay time (which differs from date to date)

each time a gate is passed through.

The above points must be taken into consideration when designing the target system.

Caution: When the IE-78K0-NS-A and IE-78K0-NS-P04 and IE-780948-NS-EM4 are connected to

the target system, 4.0 to 5.5 V must be supplied as the target system power supply (V

Содержание IE-780948-NS-EM4









































































Результаты поиска

Содержание IE-780948-NS-EM4

Отзывы:

Похожие инструкции для IE-780948-NS-EM4

Бренды по названию

Популярные бренды

NEC IE-780948-NS-EM4, Руководство пользователя

Результаты поиска

Содержание IE-780948-NS-EM4

Отзывы:

Похожие инструкции для IE-780948-NS-EM4

Бренды по названию

Популярные бренды