NEC GT5000 Series, Руководство по установке

Страница: 10 / 10

www.necvisualsystems.com GT5000/6000 Page 10 of 10
Input Panel
Control Codes
Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT RGB 1 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT RGB 2 02H 03H 00H 00H 02H 01H 02H 0AH
INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
INPUT SELECT DVI (DIGITAL) 02H 03H 00H 00H 02H 01H 1AH 22H
INPUT SELECT VIEWER 02H 03H 00H 00H 02H 01H 1FH 27H
LAN 02H 03H 00H 00H 02H 01H 20H 28H
SLOT
1-1 02H 03H 00H 00H 02H 01H 24H 2CH
SLOT 1-2 02H 03H 00H 00H 02H 01H 25H 2DH
SLOT 2-1 02H 03H 00H 00H 02H 01H 29H 31H
SLOT 2-2 02H 03H 00H 00H 02H 01H 2AH 32H
RGB1(VIDEO) 02H 03H 00H 00H 02H 01H 07H 0FH
RGB1(S-VIDEO) 02H 03H 00H 00H 02H 01H 0CH 14H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
ON SCREEN MUTE ON 02H 14H 00H 00H 00H 16H
ON SCREEN MUTE OFF 02H 15H 00H 00H 00H 17H
ASPECT RATIO 1.25:1 (5:4) 03H 10H 00H 00H 05H 18H 00H 00H 00H 00H 30H
1.33:1 (4:3) 03H 10H 00H 00H 05H 18H 00H 00H 01H 00H 31H
1.78:1 (16:9) 03H 10H 00H 00H 05H 18H 00H 00H 02H 00H 32H
1.85:1 03H 10H 00H 00H 05H 18H 00H 00H 03H 00H 33H
2.35:1 03H 10H 00H 00H 05H 18H 00H 00H 04H 00H 34H
AUTO ADJUST 02H 0FH 00H 00H 02H 05H 00H 18H
Note: Contact your NEC rep for codes not listed.
Cable Connection
Communication Protocol: PC Control Connector (D-Sub 9P)
Baud Rate: 38400 bps
Data Length: 8 bits
Parity: No Parity
Stop Bit: One bit
X on/off: None
Communications: Full duplex
NOTE1: It is recommended to set the projector to “Idle Mode” in the
Setup menu for best Power ON response.
NOTE2: Pins 1, 4, 6, and 9 are used inside the projector.
NOTE3: Jumper “Request to send” and “Clear to Send” together on
both ends of the cable to simplify cable connection.
NOTE4: For long cable runs it is recommended to set communication
speed to 9600 bps in the Setup menu.
1 2 3 4 5
6 7 8
9
To GND of PC
To RxD of PC
To TxD of PC
To CTS of PC
To RTS of PC
DVI
SLOT1
SLOT2
RGB2
RGB OUT
AUDIO OUT
AUDIO
VIDEO S-VIDEO
AUDIOAUDIO
RGB1
AUDIO
USB(A)
USB(B)
PC CARD
1
2
PC CONTROL
IN
OUT
LAN
REMOTE1
REMOTE2 SC TRIGGER
AC IN
AC SW
IN OUT
AUDIO