Connecting external equipment
TV AND AV
RF OUTPUT (RCA JACK)
Use the TV/VIDEO button on the remote control or on the front of the set to select one of
the three options. Whenever the TV/VIDEO button is pressed, the on-screen display will
be changed as shown: AV1 AV2 S-VHS TV
This always provides the RF signal output of the selected channel. This is used to connect
a VCR for recording or a monitor device for displaying.
Connecting to a Mono VCR
When connecting a Mono VCR, you can achieve sound from both speakers if you connect the white
cable (left audio) to the “Audio Out” of the VCR. Press the MODE button several times(on TV remote
control) until “L -input” is displayed on the TV screen.
(Note)
If you choose “R -input” mode, there will be no sound. If you choose “Stereo” mode, there
will be only one speaker operating.
INPUT1 (SCART JACK)
This is used to connect a VCR, a Camcorder, a S-VHS VCR.
You can also receive the S-VHS singal with SCART JACK by selecting S-VHS mode with
TV/VIDEO button.
✳
OPTION : You can also use the SCART to RCA/S-VHS connector for the reception of the S-
VHS signal.
3
VIDEO L AUDIO R
S-VHS
OUTPUT
INPUT1(S-VIDEO)
R
AUDIO
L
VIDEO
TV
VCR
