© NEC Corporation 2019 25
3.5.2.5
Network and Power Supply Socket
The Network and power supply sockets (Figure 18, A) combine power and data distribution for
each column of modules in the LED Wall. The sockets are male and female adapters at the top
and bottom surfaces of the cabinet. The sockets interconnect two cabinets of a column (Figure
19). The socket is connected to Ethernet ports (Figure 18, B) on the Hub board (D) and to the
Power distribution unit (PDU) (wiring, C).
The sockets wire to the PDU (Figure 20, E) and ground (F) on the cabinet. The PDU, in turn,
connects to the redundant Power supply units (G) via the hub board’s power supply connectors
(see also Figure 26, D, p. 28).
The Ethernet cables plug into Ethernet ports on the Hub board (Figure 18, B).
Figure 18: Network and Power Supply Sockets – Top and Bottom
Figure 19: Connected Sockets
Figure 20: Sockets Wired to PDU behind HUB
A
B
C
D
G
F
E
