NEC Express5800/T120e, Быстрый старт, Страница: 5 / 6

Precautions for Using
Express5800/T120e
Thank you for purchasing our product.
This document provides precautions on the use of this product.
Please read through the instructions below and keep this document in a safe place for your future
reference.
■ Precautions
● Precautions for Using Windows Server 2012 R2
To install Windows Server 2012 R2, visit the following website and confirm the information.
http://www.58support.nec.co.jp/global/download/index.html
[Windows Support Kits] > Windows Server 2012 R2
● Precautions for Using Windows Server 2008 or Windows Server
2008 R2
Updating the LAN driver
To use Windows Server 2008 or Windows Server 2008 R2, update the LAN driver.
After installing the OS, Starter Pack and Service Pack by following the Installation Guide
(Windows), refer to the URL below and select your server model and update to the latest LAN
driver.
http://www.58support.nec.co.jp/global/download/index.html
● Precautions for Using EXPRESSSCOPE Engine 3, NEC ESMPRO
Manager or ROM Utility
"Shutdown System" function
In the ECO setting of each tool/utility, when [Aggressive Mode] → [Shutdown System] is enabled,
the “Shutdown System” function operates to shut down the OS depending on the power consumption
state. If the OS shutdown takes more than 45 seconds, forced power down may occur.
The below shows how to select the ECO setting screen on each tool/utility.
■ For EXPRESSSCOPE Engine 3 : [Configuration] → [BMC] → [ECO]
■ For ESMPRO/Server Manager :
[Remote control] → [Electric Power Management] → [ECO setting] → [Power Capping]
■ For ROM Utility :
The following message appears at the lower left of the screen when the server is powered on.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
Press <F4> to boot ROM Utility.
Select [KB_Select]
→ [BMC Configuration] → [BMC Configuration] → [ECO] → [Configuration].