1. Installing Internal Optional Devices
Express5800/T110h-S User’s Guide
60
Chapter 2 Preparations
Installing a 3.5-inch HDD cage and hard disk drives
1.10.1
Install a 3.5-inch HDD cage in the server by using the following procedure.
See
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and the front bezel, see
Chapter 2 (1.3 Removing the Side Cover
and
2.
Insert the HDD cage into the HDD bay.
3.
Push the HDD cage so that its tabs A and B
4.
come fit into the slits on the chassis.
Insert one side of the lock plate into the slits
5.
of the chassis. Push the lock plate in the
direction shown by the arrow to lock the HDD
cage.
Important
Make sure to insert the lock plate into the groove of the chassis correctly. Incorrect
installation causes the removal of the side cover to be impossible.
Mount the HDD trays that come with the HDD
6.
cage from both sides of the 3.5-inch hard disk
drive. Mount the tray marked "A" on the left side,
and the tray marked "B" on the right side. Mount
the hard disk drive so that the flat face of the
hard disk drive faces downward.
The "C side" must
face upward.
A
B
