![background image](http://html1.mh-extra.com/html/nec/express5800-r110j-1/express5800-r110j-1_manual_4179640019.webp)
●
How to recover stop POST by the message of "Memory Initialization Start"
If the server stops POST by a message of "Memory Initialization Start", recover them by setting to the default value by
SW6 of the system maintenance switch.
Refer to “Chapter 1 - 7.3.3 Restore the Default Settings of System Configuration” of the maintenance guide.
●
Notice of the backup and restore of RBSU Settings by REST ful interface tool.
In the case of iLO5 firmware version 2.40 or later, backup and restore of RBSU Settings should be done from "Backup
and Restore Settings" menu under System Utilities. (See "Backup and Restore of RBSU Settings" in Maintenance
Guide (Common).)
●
When "PCIe Device Disable" is set to "Disabled", "HPE Ethernet 1Gb 2-port 361i Adapter" cannot be
disabled.
When LAN firmware is included in the following list, setting "PCIe Device Disable" to "Disabled" will not disable HPE
Ethernet 1Gb 2-port 361i Adapter.
○
LAN firmware list
- 1.2529.0
- 1.2688.0
- 1.2836.0
System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Device Configuration
> (Embedded LOM Name) menu > PCIe Device Disabled
●
High Precision Event Timer (HPET) is not displayed in the Windows(R) Device Manager and cannot be
used.
When system ROM version is earlier than v2.52 (09/16/2021), the High Precision Event Timer (HPET) does not
displayed in the Windows(R) Device Manager and cannot be used.
When this issue occurs, the following message will be displayed in the properties of the High Precision Event Timer.
●
About the internal DVD-ROM (N8151-137/138) display
When System ROM Version v 1.22 (04/04/2019) or later and Embedded SATA Configuration setting (* 1) is set to [Smart
Array SW RAID Support], two internal DVD drive information is displayed in the Disk Utilities menu (* 2) depending on the
operating environment.
Both can refer to the same internal DVD information.
(*1)
「
System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options >
Embedded SATA Configuration
」
(*2)
「
System Configuration > HPE Smart Array S100i SR Gen10 > Disk Utilities
」