CONFIGURATION GUIDE
–
NEC Express5800/A2040e, A1040e
NEC Corporation
Rev.1.0
– June 2018
29
Hot Plug Kit is required.
As 2m cables are used to connect SAS Controller and Device Expansion Unit, the following remarks
should be noted when using Device Expansion Unit.
-
Device Expansion Unit (1U): N8141-69
Can be mounted with the space with 0 - 2U with the server (on top or under).
・
Device 1 (left side of the Unit in front view / connector 1 of right side from rear view) can
be connected.
・
When requiring to connect to Device 2 (right side of the Unit in front view / connector 2 of
the left side from rear view), please consult with NEC through the sales representative for
the details before ordering.
As 2m cables are used to connect SAS Controller and LTO (rack-mount type), the following remarks
should be noted when using the LTO (rack-mount type).
LTO (1U): N8160-95/100
Cannot be mounted on top of the server (with 0U from the server)
Can be mounted just below the server (with 0U from the server)
If need to mount with 1-3U from the server (on top or under), the location of the SAS
Controller should be adjusted. Please contact to NEC representative for more details.