NEC Express5800/320Ma, Руководство пользователя

Страница: 19 / 74

Hardware Requirements of Ethernet PCI Adapters
Ethernet PCI Adapters 2-3
Requirements and configuration procedures for the embedded Ethernet PCI adapters
are similar to the procedures for the other Ethernet PCI adapters.
Hardware Requirements of Ethernet PCI Adapters
For fault tolerance, install Ethernet PCI adapters that are in the same team in different
I/O elements. Although teamed Ethernet PCI adapters in the same I/O element are
marked as duplexed in ftSMC, they are not fault tolerant. If the I/O element fails, or if
you remove the physical enclosure that contains the adapters (in a system with more
than one enclosure), network connectivity is lost.
Table 2-7 describes the slot-location requirements and recommendations for the
U574 PCI adapter and the U575 PCI adapter. If you plan to configure Ethernet PCI
adapters into teams, also consider the configuration requirements described in
“Configuring Ethernet Teams” on page 2-14 .
Table 2-8 lists the maximum number of Ethernet PCI ports that Express5800/320Ma
systems support.
Table 2-7. U575 PCI Adapter Slot Locations
System Slot-Location Requirements and Recommendations
Express5800/32
0Ma
3.2 GHz
,
3.6 GHz, and
Dual-Core
For maximum throughput, install U574 PCI adapters and U575 PCI
adapters in a two-way symmetric multiprocessing (SMP) system. The
data load between teamed gigabit Ethernet PCI adapters is balanced
only in systems with two CPUs in each CPU enclosure.
For best performance, install multi-port Ethernet PCI adapters in slot 2 or
slot 3. (To add slots 2 and 3 in an Express5800/320Ma
3.2 GHz
system,
install the AK533 attachment kit. See the Express5800/320Ma:
Operation and Maintenance Guide for more information.)
Table 2-8. Maximum Number of Ethernet PCI Adapters
System
U575 PCI
Adapter
Maximum Number of Ports
†
Express5800/
320Ma
3.2
GHz
‡
2 8 (4
†
ports, 2 on each unembedded adapter
and 4 on embedded Ethernet adapters)
Express5800/
320Ma
3.6
GHz and
Dual-Core
6 16 (6
†
ports, 2 on each unembedded adapter
and 4 on embedded Ethernet adapters)