NEC Express 5800 TM700, Руководство пользователя

Страница: 53 / 132

TM700 User Guide - Configuring Your System
3 - 9
Chipset Submenu
Onboard Devices Configuration Submenu
Table 3 - 3: Chipset Submenu
Feature Choices or
Display Only Description Your Setting
WARNING: Setting wrong values in below sections may cause system to malfunction.
Configure DRAM
Timing by SPD
Disabled
Enabled
When this feature is enabled,
the DRAM timing are set
according to the DRAM SPD
(Serial Presence Detect). When
disabled, you can manually set
the DRAM timing parameters
through the DRAM sub-
features
DRAM ECC
Capability
Disabled
Enabled
Allows you to enable or disable
the DRAM ECC (Error
Correction Code) capability.
Graphics Aperture
Size
4, 8, 16, 32, 64, 128 ,
256MB
Allows you to set the size of
mapped memory for AGP
graphic data.
Table 3 - 4: Onboard Devices Configuration Submenu
Feature Choices or
Display Only Description Your Setting
Onboard AC’97
Audio
Auto
Disabled
Allows you to configure the
onboard audio.
Onboard LAN Disabled
Enabled
This option allows you to
enable or disable the onboard
LAN controller
Onboard LAN Boot
ROM
Disabled
Enabled
Only if Onboard LAN is
enabled.
Serial Port1
Address
Disabled
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Allows you to select the Serial
port 1 base address.
Serial Port2
Address
Disabled
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Allows you to select the Serial
port 2 base address.
Parallel Port
Address
Disabled
378
278
3BC
Allows you to select the Parallel
port base address.
Parallel Port Mode Normal
Bi-Directional
EPP
ECP
Allows you to select the Parallel
port mode.
EPP Version 1.9
1.7
Only if Parallel Port Mode set to
EPP.
ECP Mode DMA
Channel
DMA0
DMA1
DMA3
Only if Parallel Port Mode set to
ECP.
Parallel Port IRQ IRQ5
IRQ7
Allows you to select the Parallel
port IRQ