NEC EXP481A Скачать руководство пользователя страница 81

Страница: 81 / 151

1. Installing Internal Optional Devices

Express5800/R120d-2E User’s Guide

Chapter 2 Preparations

Insert the riser card into the slot on

motherboard.

When connecting the card, position the

terminal part of the card to the slot on

the motherboard and insert it.

10.

Secure the card with two screws you

removed in Step 2.

11.

Continue to install or remove internal optional devices, mount and connect the server, and turn it on.

12.

Make sure that no error messages are displayed on POST screen.

For details on POST error messages, refer to

Chapter 3 (1. POST Error Message)

in "

Maintenance

Guide

13.

Start the BIOS Configuration utility on the mounted board to set up the board.

Availability or startup and operation procedure of the utility depends on board. For details, refer to the

manual that comes with the board. If a PCI card including RAID Controller, SCSI controller, and LAN

card which connects to any bootable device is added, the boot priority might be changed to the

default setting. In that case, configure the boot priority in the

Boot

menu of the BIOS Setup utility.

For details about the

Boot

menu, refer to

Chapter 2 (1.2.5 Boot)

in "

Maintenance Guide

Содержание EXP481A
























































































































































Результаты поиска

Содержание EXP481A

Отзывы:

NEC EXP481A, Руководство пользователя, Страница: 81 / 151

Результаты поиска

Содержание EXP481A

Отзывы: