NEC ELECTRA ELITE IPK II, Руководство по аппаратному обеспечению системы, Страница: 605 / 642

Electra Elite IPK II Document Revision 3
System Hardware Manual 13 - 37
___________________________________________________________________________________
___________________________________________________________________________________
10.1.4 Programming Options
To enter Programming mode, press and hold REDIAL until a
diamond arrow is displayed on the LCD. Then press the applicable
key and follow the instruction in
Table 13-3 Programming Options .
CLEAR (vertical line
and left arrow icon)
Press to clear the last digit entered or press and hold
to clear all numbers.
Press to exit programming mode.
VOLUME (loud and
dim speaker icons)
Press during call to adjust call volume or press while
telephone is ringing or in standby mode to adjust
ringer volume.
MUTE (mic with
diagonal line icon)
Press to mute sound.
Table 13-3 Programming Options
Menu Option Key Programming
Ringer Melody 1
Press REDIAL. The current melody selection
flashes. Press 1~5 to change melody. Press
REDIAL to save the selection.
Dialing Mode 2
Press REDIAL. The current dialing selection
flashes. Press 1 for tone or 2 for pulse. Press
REDIAL to save the selection.
Flash Duration 3
Press REDIAL. The current duration flashes.
Press 1~5 to select duration as follows:
1 = 600 ms
2 = 300 ms
3 = 150 ms
4 = 100 ms
5 = 80 ms
Press REDIAL to save the selection.
Local Number
,
4
Press REDIAL. Enter the telephone number
that you want displayed on the LCD in
standby mode. Press REDIAL to save the
number.
Conference
,
5
Press REDIAL. Enter the telephone number
you want the conference key to dial. Press
REDIAL to save the number.
Service
,
6
Press REDIAL. Enter the telephone number
you want the O key to dial. Press REDIAL to
save the number.
Table 13-2 Keypad Functions
Key Function