English-33
English-32
ARC is an audio link which can
replace other cables between
the Monitor and the receiver or
speaker system. HDMI-1 terminal
can support ARC function.
[Device List]
Show the device list.
7.
Energy Options
Home
mode is intended for
home use, and will save much
energy. In this mode, the Monitor
automatically switches to Auto
Power save mode and then Auto
Standby mode when no external
signal is input.
Retail
mode is a relatively more
energy consuming mode. In
this mode, the Monitor does not
switch to Auto Power save mode
or Auto Standby mode when no
external signal is input.
Office
mode is between Home
mode and Retail mode. In this
mode, the Monitor automatically
switches to Auto Power save
mode but will not continue to
switch to Auto Standby mode
when no external signal is input.
8.
Auto Power Down
Select
On
to enable your TV to
turn off automatically when you
do not press any buttons in 4
hours.
9.
RGB Options
(Only available for VGA input,
and when there is VGA signal
input)
[Auto Adjust]
Automatically adjust the image
settings such as position.
[H. Position]
Adjust horizontal position.
[V. Position]
Adjust vertical position.
[Clock]
Set to the minimum level if noise
occurs.
[Phase]
Eliminate flicker and distortion.
[Reset RGB Options]
Reset RGB options to factory
default settings.
10.
Monitor ID
Set the monitor ID number from
1─100
,
All
, or
Group A─J.
11.
Time Schedule
This function enables your TV to
turn on and off automatically.
[Schedule Status]
Select
On
to enable Time
Schedule.
[Current Time]
Set the current time before using
this function.
[Power On]
Set the time for your TV to turn
on.
[Power Off]
Set the time for your TV to turn
off.
12.
Sleep Timer
Select how long the TV will take
to automatically turn intself off.
Off / 5
/
10
/
15
/
30
/
60
/
90
/
120
/
180
/
240
(minutes)
13.
No Signal Menu
Select how long the No Signal
message will display.
Off /
10 seconds / 30 seconds /
1 minutes / 5 minutes / 10
minutes / 15 minutes
14.
IR Lock Setting
Select
On
to lock your remote
control, and the remote control
will disable to control the TV.
Press
Display
button for 5
seconds can unlock it.
15.
System Info
Indicate the display information.
16.
Reset AV & Setup
Reset all
Audio
,
Video
, and
Setup
settings to factory default
settings
.
