NEC E585, Руководство пользователя

Страница: 38 / 40

English-37 English-36
Before Calling Service
Please make these simple checks before calling service� These tips may save
you time and money as charges for receiver installation and adjustments of
customer controls are not covered under your warranty�
Symptoms Items To Check And Actions To Follow
No power
• Check to see if the display’s AC power cord is plugged
into the outlet�
• Unplug the display and after 60 seconds reinsert the plug
into the outlet and power on the display�
No picture
• Adjust the contrast and brightness settings�
Good picture but no
sound
• Increase the volume�
• Confirm that the display is not muted by pressing the
Mute button on the remote control�
Good sound but poor
color
• Adjust the contrast, color and brightness settings�
Poor picture
• Poor picture quality may occur when an activated S-VHS
camera or camcorder is connected to your display and
another peripheral at the same time� Switch off one of the
peripherals�
Presence of a horizontal
dotted line
• This may be caused by electrical interference (e�g� hair-
dryer, nearby neon lights, etc�)�
• Power cycle the equipment by turning off and then turning
back on�
Display not responding
via the remote control
• Determine if the batteries are working and replace
batteries if necessary�
• Clean the remote control sensor lens on the display�
• If necessary, utilize the buttons located on the side of the
display�