background image

English-5

English-4

English

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS 

UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S 

POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR 

OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH 

VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE 

POWER CORD IS UNPLUGGED FROM WALL SOCKET. 

TO FULLY DISENGAGE THE POWER TO THE UNIT, 

PLEASE DISCONNECT THE POWER CORD FROM THE AC 

OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER 

SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the 

unit may have sufficient magnitude to cause electric shock. 

Therefore, it is dangerous to make any kind of contact with any 

part inside this unit.

This symbol alerts the user that important literature concerning 

the operation and maintenance of this unit has been included. 

Therefore, it should be read carefully in order to avoid any 

problems.

CAUTION:

 Please use the power cord provided with this TV in accordance 

with the table below. If a power cord is not supplied with this equipment, 

please contact your supplier.

Plug Type

Plug Shape

Region

Voltage

North America

U.S.A./Canada

AC 120 V

Содержание E326



















































Отзывы: