52
MENU STRUCTURE
e132
WAP setting
• If the settings have already been made by the Service Provider,
you may browse immediately.
• If access profiles have already been assigned by your Service
Provider, select a profile and activate it.
• Otherwise you may key in the setting manually. For the correct
settings, contact your network operator or service provider.
Key in the service settings manually
1. In the WAP menu, select
WAP Profile
.
2. Choose a profile, press
Select
, and then select
Edit
to edit the
settings.
You need to enter Homepage, User ID, Password and IP address
information in to your phone. To get the information, you may need
to contact your service provider.
Dial type:
You can access WAP via GSM or GPRS.
1. In the WAP menu, select
WAP profile
.
2. Choose a profile, press
Select
, and then select
Edit
.
3. Select
Dial type
, and then choose either
GSM
or
GPRS
.
To get the GPRS access point, you may need to contact your service
provider for the service.
Activate WAP settings
After you complete all WAP settings, select
Activate
from the
WAP
profile
menu.
Homepage
To launch the browser from standby mode, press the
key. Once
connected, the homepage is displayed. Content depends on the
service provider.
To exit the browser, press the
key.
NEC_e132_EN.book Page 52 Thursday, June 29, 2006 2:01 PM