14
GETTING STARTED
e122
3. Insert the battery (4) and replace the rear cover of the phone (5).
Push the cover up until you hear a click.
Charging the battery
You must fully charge the battery before using
your phone for the first time.
1. Connect the charger plug to the socket on
the bottom of your phone (A).
2. Connect the charger to an AC wall outlet.
3. It may take 5-15 minutes before a charging
icon is shown in the display.
Note:
You can use the phone while the charger is connected but
charging is suspended during that time.
Note:
A weak battery is indicated by a warning sound and "
" is
shown on the display. When the battery is empty "
" is
shown on the display and the phone will switch off.
Switching the phone on and off
Press and hold
.
Note:
If the phone shows "Insert SIM" when the SIM card is properly
inserted, contact your network operator or service provider.
If the phone asks for the PIN code, key in the PIN code and press
OK
.
Note:
Do not switch the phone on when mobile phone use is
prohibited or when it may cause interference or danger.
#
$
"