Quick Start
3
To attach the MultiSync
®
E
1100
+
™
monitor to your system, follow
these instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the
connector of the display card in your system
(Figure A.1)
. Tighten all screws.
For the Mac: Connect the Macintosh cable adapter to the monitor connector
on the Macintosh
(Figure B.1)
. Attach the 15-pin mini D-SUB end of the
captive signal cable to the Macintosh cable adapter on the computer
(Figure
B.1)
. Tighten all screws.
4. For download information on the Windows
®
95/98 INF file for your MultiSync
E
1100
+ monitor, refer to the
References
section of this User’s Manual.
5. Connect one end of the power cord to the MultiSync E
1100
+ monitor and the
other end to the power outlet
(Figure C.1)
.
6. Turn on the monitor
(Figure D.1)
and the computer.
NOTE: If you have any problems, please refer to the
Troubleshooting
section of
this User’s Manual.
Figure A.1
Figure B.1
78133724.wpc
11/18/98, 11:52 AM
5
