manualshive.com logo in svg

NEC DTERM Series, Руководство пользователя, Страница: 54 / 56

Поделиться
Скачать
NEC DTERM Series Скачать руководство пользователя страница 54

D

term 

Cordless Lite

 Owner’s Manual 

6 - 1

Troubleshooting

If the 

D

term 

Cordless Lite is not performing to your

expectations, try these simple steps.  If this does not resolve
the problems, contact the NEC dealer.

Note:

Do not attempt to service this unit yourself.  All service
must be done by qualified service personnel.

Table 6-1  Troubleshooting

Problem

Suggestion

Charge 1 light will not come on 
when the handset is placed in 
the charging unit.

•

Make sure the AC adapter is plugged into
the charging unit and wall outlet.

•

Make sure the handset is properly seated in
the charging unit.

•

Make sure the lead-acid battery pack is
properly placed on the handset.

•

Make sure that the charging contacts on the
handset and charging unit are clean.

Charge 2 light will not come on 
when the spare battery is 
placed in the charging unit (low 
battery only).

•

Make sure the AC adapter is plugged into
the charging unit and wall outlet.

•

Make sure the spare battery is properly
seated in the base unit.

•

Make sure the charging contacts on the
handset and charging unit are clean.

Conversation is interrupted 
frequently.

•

Make sure the base unit antenna is fully
vertical.

•

Move closer to the base unit.

•

Check for 

low batt

 warning.

All manuals and user guides at all-guides.com

Содержание DTERM Series

























































Отзывы:

Нет отзывов