NEC Dterm DTL-RPT-2, Руководство пользователя

Страница: 18 / 30

2 - 6 Getting to Know Your Repeater
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 D
term
Cordless DECT
During registration, the LED on the front of the repeater will blink. The table explains
what the LED blink patterns indicate.
S
ECTION
5 I
NSTALLING THE
AC A
DAPTER
1. Using both thumbs, press down on the raised ridges of the adapter cover on the
repeater until you hear a click.
2. Being careful not to angle the cover, gently pull to remove it.
Table 2-1 Repeater LED Patterns
State Meaning
Steady On The repeater is registered to a base and has a good signal
from that base (or another repeater registered to that
base).
Slow blink (one blink per
second) Standby mode. The repeater is not registered or cannot
be connected to the registered base.
Flicker (2 rapid blinks per
second) The repeater is in registration mode (it is looking for a
base to register to).
Figure 2-6 Removing the Adapter Cover