NEC Dterm Cordless Lite Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 56

NEC Dterm Cordless Lite Скачать руководство пользователя страница 12

NEC America, Inc.

Issue 1

D

term

Cordless Lite

Owner’s Manual

1 - 3

S

ECTION

3

I

MPORTANT

S

AFETY

I

NSTRUCTIONS

When using the telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electrical shock, and injury to persons, including the
following:

1.

Read and understand all instructions.

2.

Follow all warnings and instructions marked on the
product.

3.

Unplug this product from the wall outlet before
cleaning. Do not used liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.

4.

Do not use this product near water; for example, near
a sink or in a wet area.

5.

Do not place this product on an unstable cart, stand,
or table. The telephone can fall, causing serious
damage to the unit.

6.

To protect the product from overheating, do not block
or cover any slots or openings in the base unit. This
product should never be placed near or over a
radiator or heat register. This product should not be
placed in a built-in installation unless the proper
ventilation is provided.

7.

This product should be operated only form the type of
power source indicated on the marking label.

8.

Do not allow anything to rest on the power cord. Do
not locate this product where the cord will be
damaged by persons walking on it.

9.

Do not overload wall outlets and extension cords, as
this can result in the risk of fire or electrical shock.

«
...
10
11
12
13
14
...
»

Содержание Dterm Cordless Lite

























































Отзывы:

Нет отзывов