NEC Dterm Cordless II, Руководство пользователя

Страница: 5 / 12

4
Muting
1. Press MUTE during conversation.
>
The ‘TALK’ icon blinks and the voice through the microphone is muted.
2. Press MUTE again to cancel the muted condition. (Finishing the conversation also cancels
the mute condition.)
>
The ‘TALK’ icon stops blinking.
Conferencing
This feature allows the user to set up a 3-party conference.
1. During a conversation, press CONF .
2. Dial the number for the second conference party.
3. Press CONF again to establish a 3-party conference.
Receiving Volume
1. During a conversation, press R/VOL to change the ear speaker volume setting.
>
The telephone has four receiver volume levels: Low, Medium, High, Maximum .
2. Continue to press R/VOL until the desired volume is selected.
>
When you hang up, the telephone retains the last selected volume.
Ring Tone/Volume
In standby mode, press R/VOL to change the ring tone and volume.
In standby mode, press R/VOL .
>
The selected tone and volume rings for about two seconds. The display shows ring
tone:
Type A – High/Low , Type B – High/Low , Type C – High/Low , OFF – Vibrate .
If R/VOL is pressed while the ringer tone is sounded, the handset stops ringing and goes to
the next tone setting.
>
The LCD display disappears after the selected tone/volume rings for about two
seconds.