NEC DSX-160, Руководство пользователя

Страница: 184 / 188

Walking Class of Service
176
◆
Features DSX Feature Handbook
Walking Class of Service
Description
Walking Class of Service allows an extension user to temporarily implement their Toll Restriction and Class
of Service settings at a co-worker’s keyset. This is normally used to override dialing restrictions at a tele-
phone. For example, an executive with an unrestricted phone can walk to any keyset in the building, imple-
ment Walking Class of Service, and dial without restriction.
After the keyset goes idle, Walking Class of
Service remains in effect for 10 seconds. This permits the user to make multiple calls before the keyset
returns to its normal restrictions.
Walking Class of Service and Extension Locking
Walking Class of Service overrides Extension Locking. For example:
❥
Extension 301 is permitted by their Class of Service and Toll Restriction to use Paging and place long
distance calls.
❥
Extension 306 locks their extension. While locked, Class of Service 15 prevents Paging and Toll Level 7
prevents long distance calls. These features are no longer available at extension 306.
❥
The extension 301 user goes to extension 306 and implements Walking Class of Service.
❥
The extension 301 user can then use 306 to make long distance calls and Page (even though 306 was
locked to prevent those features).
Operation
An extension user can temporarily use their Toll Restriction and Class of Service options at a
co-worker’s phone.
Using Walking Class of Service
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enable Walking Class of Service at a co-worker’s extension:
1. Press INTERCOM .
2.
Dial ##0 .
• You see:
WALKING COS
ENTER EXTENSION:
3.
Enter your own extension HOLD .
• You see:
xxx: WALKING COS
ENTER PIN CODE:
4.
Enter your own PIN HOLD .
• You’ll hear error tone if your extension does not have Walking Class of Service capability.
• If your entry is not accepted, you have either entered the wrong PIN number or your extension has no PIN
number assigned.
5.
Place any call or use any feature allowed by your Toll Restriction and Class of Service settings.
• You can place additional calls.
• Walking Class of Service automatically deactivates if the extension is idle for longer than 10 seconds.
Entering or Changing Your PIN Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enter your PIN number (if you don’t have one assigned):
1. Press INTERCOM and dial ##6 .