NEC DLP CINEMA NC2500S Скачать руководство пользователя страница 47

Страница: 47 / 64

6. Appendix

6-2-3. MMS STATUS indicator

Indicator condition

Off

Blinking light

Steady light

Projector condition

Multi-media switcher (MMS) not in use.

Link error

Preparing link with Built-in multi-media

switcher (MMS).

Preparing link with External multi-media

switcher (MMS).

Built-in multi-media switcher (MMS) is linked.

External multi-media switcher (MMS) is linked.

Note

Link error. An error message is

displayed in the LCD screen.

Check the content of the error.

Wait for a moment.

Red

Green

Orange

Green

Orange

6-2-4. Rear STATUS indicator

Indicator condition

Off

Blinking light

Steady light

Projector condition

Main power is off.

The projector is getting ready to turn on.

The douser is closed.

The projector is cooling down.

Safety problem, error

Error with possible image project under certain

conditions.

The projector is turned on.

The projector is in standby.

Error at a level with not affect on projection.

Note

Wait for a moment.

An error message is displayed in

the LCD screen.

Check the content of the error.

An error message is displayed in

the LCD screen.

Check the content of the error.

Green

Orange

Red (With buzzer)

Red (Without buzzer)

Green

Orange

Red

Содержание DLP CINEMA NC2500S

































































Результаты поиска

Содержание DLP CINEMA NC2500S

Отзывы:

NEC DLP CINEMA NC2500S, Руководство пользователя, Страница: 47 / 64

Результаты поиска

Содержание DLP CINEMA NC2500S

Отзывы: