English-30
HOLIDAY SETTINGS
No.
Creates holiday schedule for the monitor.
YEAR
MONTH
DAY
WEEK
Set YEAR and MONTH.
Select DAY or WEEK.
DAY: Set a day.
WEEK: Set a week and the day of the week.
If you set [--] at MONTH or YEAR, every month or year of the day you set is select as a holiday.
END DAY
Set the end of holiday date. If you schedule beyond a year, please separate the schedule per year.
NOTE: If DAY is not set, END DAY is not available. If your holiday setting includes [--] for year or month,
END DAY is not available.
SET/DELETE
Sets or deletes a schedule.
WEEKEND SETTING
WEEKEND
Set the day of the week.
DATE & TIME
Sets the date, time, and daylight savings region. Date & time must be set in order for the “SCHEDULE” function
to operate. See page 29.
NOTE: If the monitor’s main power has been turned off for two weeks, the DATE & TIME setting goes back to the
default setting and the clock function stops working.
YEAR
Sets the year for the real-time clock.
MONTH
Sets the month for the real-time clock.
DAY
Sets the day for the real-time clock.
TIME
Sets the time for the real-time clock.
CURRENT DATE TIME Shows the current date and time.
DAYLIGHT SAVING
Sets daylight savings on or off.
NOTE: Please set the TIME & DATE setting first if you change the DAYLIGHT SAVING setting.
DAYLIGHT SAVING
If ON is selected, please set daylight savings settings below.
BEGIN MONTH
Set daylight savings beginning date.
END MONTH
Set daylight savings ending date.
TIME DIFFERENCE
Set the time difference.
OFF TIMER
Set the monitor to power off after a preset time period. A time period between 1 to 24 hours may be set.
NOTE: SCHEDULE is not available if OFF TIMER is ON.
RESET
Resets the following settings within the SCHEDULE menu back to factory setting: DATE & TIME and DAYLIGHT
SAVING.
MULTI INPUT
INPUT DETECT
Selects the method of input detection the monitor uses when more than one signal source is connected.
NONE
The Monitor will not search for signals at the other video input ports.
FIRST DETECT
When the current video input signal is not present, the monitor searches for a video signal from another video
input port. If a video signal is present in the other input, the monitor switches from the current video source to this
active video source automatically.
The monitor will not look for any other video signals while the current video source is present.
CUSTOM DETECT
Sets the priority of input signals.
When CUSTOM DETECT is selected, the monitor searches on preset inputs only.
When you use digital input (DisplayPort, HDMI1, HDMI2 and HDMI3), other digital input is not detected.
When you use analog input (VGA or VIDEO), other analog input is not detected.
