English-29
English
AUDIO
VOLUME
Increase or decrease output volume level.
BALANCE
BALANCE
Select STEREO or MONO for the audio output.
If you select STEREO, adjust the L/R volume balance.
Press the + button to move the stereo sound image to right.
Press the - button to move the stereo sound image to left.
NOTE: BALANCE is not available if MONO is set at STEREO/MONO.
SURROUND
Artificial surround sound.
EQUALIZER
TREBLE
Accentuate or reduce the high frequency range of audio signals.
Press the + button to increase TREBLE.
Press the - button to decrease TREBLE.
BASS
Accentuate or reduce the low frequency sound.
Press the + button to increase BASS.
Press the - button to decrease BASS.
AUDIO INPUT
Selects the audio input source: [IN1], [IN2], [DisplayPort], [HDMI1], [HDMI2], [HDMI3], [MP].
NOTE: [IN1] and [IN2] are not available if MP is set in INPUT.
LINE OUT
Selecting VARIABLE enables control of the line out level with the VOLUME button.
INTERNAL SPEAKER
Selecting OFF enables internal speaker output is turned off.
AUDIO DELAY
AUDIO DELAY
Activate a delay time to output the audio signal. The DELAY TIME can be set between 0 and 100 milliseconds.
Set to ON to activate this function.
DELAY TIME
RESET
Resets all AUDIO options back to factory settings, except for VOLUME.
SCHEDULE
SCHEDULE SETTINGS
Creates a working schedule for the monitor.
Press the , + - buttons to navigate and change the schedule settings. Press the SET/ZOOM on the remote
or Input change buttons on the monitor to select settings.
NOTE: Please set DAY & TIME before configuring the SCHEDULE SETTINGS.
When the SCHEDULE SETTINGS window is closed, any schedules that you set are saved.
If schedules are set for the same time, higher SETTINGS numbers are given the priority.
If OFF TIMER is ON, SCHEDULE SETTINGS is not available.
When you select an invalid input signal or picture mode, it will display in red. While the SCHEDULE SETTINGS
window is open, schedules are not operated. Also, see page 36.
SETTINGS
Set ON to activate the schedule.
Maximum 30 schedules are set.
POWER
Setting for the monitor power. Please set ON or OFF for each schedule.
TIME
Set the schedule operation time. If there is no specific time for the schedule set [--].
INPUT
Set the input signal for the schedule. To keep the input signal that is active when the schedule starts set [--].
When you set INPUT, please select ON at POWER.
PIC. MODE
Set the picture mode for the schedule. To keep the picture mode that is active when the schedule starts set [--].
When you set PIC. MODE, please select ON at POWER.
Select one item from below (only one item is available).
DATE
Select this setting if the schedule is for one day schedule or irregular schedules.
EVERY DAY
Select this setting if the schedule is repeating every day.
EVERY WEEK
Select this setting if the schedule is repeating every week.
WEEKDAY
Select this setting if the schedule is on a weekday.
This item is set by the WEEKEND and the HOLIDAY settings. A day, which is not selected at WEEKEND and
HOLIDAY setting, is set as a weekday.
WEEKEND
Select this setting if the schedule is on a weekend.
Schedule operates on the date that is set at WEEKEND SETTINGS.
HOLIDAY
Schedule operates on the date that is set at HOLIDAY SETTINGS.
SCHEDULE LIST
List of working schedules. Displays up to 30 schedules.