NEC AccuSync LCD51VM, Руководство по обслуживанию

Страница: 10 / 129

1-7
5
Tilt
Grasp both sides of the monitor screen with your hands
and adjust the tilt as desired (
Figure TS.1 ) .
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a nonabrasive surface
(Figure R.1) .
3. Remove the 2 screws on the stand and lift off the stand (Figure R.1) .
4. Remove the 4 screws connecting the monitor to the stand and remove the
metal plate (Figure R.2) .
The monitor is now ready for mounting in an alternate manner.
5. Connect the AC cord and signal cable to the back of the monitor (Figure R.3) .
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
NOTE: Handle with care when removing monitor stand.
Quick Start
–continued
Figure TS.1
Figure R.2
Figure R.1
non-abrasive
surface
Figure R.3