NEC AccuSync AS224WMi, Руководство пользователя, Страница: 8 / 18

English-6
Contents
Your new NEC AccuSync LCD monitor box* should contain the following:
• AccuSync LCD monitor with tilt base
• Audio Cable
• Power Cord
• Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)
• Setup Manual
• Base Stand
• Cable Holder
Setup Manual Audio Cable Power Cord* 1 Video Signal Cable Base Stand AccuSync LCD monitor
(Base Stand not connected)
Setup
Manual
Cable Holder
* Remember to save your original box and packing material to transport or ship the monitor.
*1 Type of power cord included will depend on the where the LCD monitor is to be shipped.
Quick Start
To attach the Base Stand to the LCD Stand:
1. Attach the Base Stand to the Stand. The locking tabs on the Base Stand should fi t into
the hole on the Stand ( Figure S.1 ).
To attach the AccuSync LCD monitor to your system, follow these instructions:
1. Turn off the power of your computer.
2. For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of
the display card in your system ( Figure A.1 ).
For a PC or MAC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your system ( Figure A.2 ). Tighten all screws.
For a PC with Analog output: Connect a 15-pin mini D-SUB signal cable to the
connector of the display card in your system ( Figure A.3 ).
For a MAC with Thunderbolt output: Connect a Mini DisplayPort to DisplayPort
adapter to the computer and then attach the DisplayPort cable to the adapter and to the
display (
Figure A.4 ).
Figure A.1
Figure A.3
Figure A.2
Figure A.4
DisplayPort cable
(not included) DVI cable (not included) Macintosh Cable Adapter Macintosh Cable Adapter
(not included)
(not included)
NOTE: 1. When removing the DisplayPort cable, hold down the top button to release the lock.
2. Please use a DisplayPort Certifi ed DisplayPort cable.
Figure S.1
Base Stand
Stand