background image

English-1

English

WARNING

CAUTION

CAUTION:  

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED 
FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT 
THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause  
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

 

This symbol alerts the user that important literature concerning the operation and maintenance of this unit  
has been included. Therefore, it should be read carefully in order to avoid any problems.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT 
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE 
PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

 Please use the power cord provided with this display in accordance with the table below. If a power cord is not 

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the 
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type

North  America

European 

Continental

U.K.

Chinese

Japanese

Plug Shape

Country

Voltage

U.S.A./Canada

U.K.

China

Japan

EU (except U.K.)

120*

230

220

100

230

When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply 
voltage of the AC power outlet being used.

NOTE:

 

This product can only be serviced in the country where it was purchased.

Содержание AccuSync AS222WM



















Отзывы: