3
Quick Start
To attach the AccuSync
™
125F
monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the signal cable to the
connector of the display card in your system
(Figure A.1).
Tighten all screws.
For the Mac: Connect the AccuSync125
F
Macintosh cable adapter (not
included) to the monitor connector on the Macintosh
(Figure B.1).
Attach the
15-pin mini D-SUB end of the signal cable to the AccuSync125
F
Macintosh
cable adapter on the computer
(Figure B.1).
Tighten all screws.
NOTE: To obtain the AccuSync125
F
Macintosh cable adapter, call
NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662.
4. For download information on the Windows
®
98/Me/2000/XP INF file for
your AccuSync monitor, refer to the
References
section of this User’s Manual.
5. Connect one end of the power cord to the AccuSync125
F
monitor and the
other end to the power outlet
(Figure C.1).
6. Turn on the monitor
(Figure D.1)
and the computer.
NOTE: If you have any problems, please refer to the
Troubleshooting
section of
this User’s Manual.
15-pin mini D-DUB
Detachable Signal Cable
Figure A.1
AccuSync125F
01.12.12, 8:43
3
