78K0R – Save It!
To install the TK-78K0RKE3L demonstration program just press the regarding button from the Autorun of the
CD-ROM provided within the
78K0R – Save it!
package. The setup dialogues will guide you through the
installation process. The installation can also be started by executing the
TK-78K0R_KE3L_Demo.msi
in
the directory
“\TK-78K0R_KE3L Demo”
of the CDROM.
6.2 IAR Systems Embedded Workbench for 78K installation
To install the IAR Systems Embedded Workbench for 78K including C-SPY debugger / simulator press the
regarding button from the Autorun of the CDROM provided within the
78K0R – Save It!
package. The
installation can also be started by executing the
Autorun.exe
program in the directory
”\IAR Systems\”
of the CDROM.
When running the autorun.exe the following screen appears.
Figure 9: IAR Systems Installation screen
To install the IAR Embedded Workbench for 78K just press the regarding button “Install IAR Embedded
Workbench ®”. The setup dialogues will guide you through the installation process. For further information
about the IAR Embedded Workbench installation refer to the
InstallationGuide_IAR_EWB.ENU.pdf
in
the directory
”\IAR Systems\”
of the CDROM.
Note: Please make sure to install the 78K0R/Kx3-L device file package for the IAR Embedded
Workbench, as explained below, before using the IAR Embedded Workbench with the TK-
78K0RKE3L board.
_______________________________________________________________________________________________
User’s Manual
U19663EE1V0UM00
21
