78K0R – Save It!
9. Flash Programmer WriteEZ4
WriteEZ4 is flash programming software to flash hex files to the related device. For installation information
refer to the chapter
.
Figure 27: WriteEZ4 Startup
9.1 Device Setup
To provide all necessary information about the device to be programmed, only the corresponding flash
parameter file must be loaded. The parameter file (*.prm) for the µPD78F1009 is located on the CDROM, in
the same folder as the WriteEZ3 setup file. Please use the menu
“Device -> Setup…“
to open the following
dialogue and the button
“PRM File Read”
to select the parameter file.
Figure 28: WriteEZ4 Device Setup Dialogue
_______________________________________________________________________________________________
User’s Manual
U19663EE1V0UM00
33
