NEC 2U SAS JBOD Enclosure, Руководство по настройке

Страница: 13 / 19

CONFIGURATION GUIDE
–
2U SAS JBOD Enclosure
NEC Corporation Revision 4.0
– July 24, 2015
13
1.2 2U 2.5-inch SAS JBOD Enclosure (2)
Category Product Name / Description Part Number
Storage Controller
Required
RAID Controller (2GB, RAID0/1/5/6)
LSI MegaRAID SAS 9380-8e
RAID0/1/5/6/10/50/60, 2GB, Ext. 8, PCIe 3.0 x8, SAS 12Gb/s,
SATA 6Gb/s,
Flash cache protection modules included
N8103-179
Cable
1 to 2 Required
External SATA Cable
2 m, 1 x SFF-8088 to 1 x SFF-8644
K410-322(02)
Enclosure
1 to 2 Required
2U 2.5-inch SAS JBOD Enclosure
24 x 2.5-inch Hot-plug hard drive bays
N8192-101F
Bezel Front Bezel
For N8192-101F/102F
N8192-302F
Drive
24 slots
available
300GB HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10000 rpm
N8192-501
450GB HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10000 rpm
N8192-502
600GB HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8192-503
900GB HDD
1 x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8192-504
1.2TB HDD
1 x 1.2 TB, SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
N8192-508
NOTE:

Storage controllers must be compatible with the server connected.

The drive enclosures connected to one storage controller must be identical.

One drive enclosure can be connected to one port of storage controller.

Eight and more disk drives must be installed.

All hard drives within a RAID array should be of the same capacity and rotation speed.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.

Any of RAID arrays cannot be used as a boot device.