Assembly and Installation of Antenna
1)
Insert the Nebulink CD in the CD-ROM drive
2)
Click ‘Start’
Æ
‘Run’, Type [CD-ROM Drive]:\SatFinder\Satwin.exe
(Example D:\SatFinder\Satwin.exe)
3)
Click ‘OK’.
4)
Click ‘File’
Æ
‘New’
Æ
‘New Look Angle’
5)
Click ‘Zip’, input your Zip Code, Click ‘Sat’
Æ
‘Telstar5’
Æ
‘OK’
6)
Locate ‘True Azimuth’ Use your compass to locate a location for you satellite that will
not have obstructions.
7)
Using the diagram on page 5 assemble the antenna
8)
In the Satfinder Software locate ‘Elevation’, set satellite elevation to this setting
9)
Locate ‘Polarization Offset’, Set LNB to this setting,
10)
Connect Satellite antenna cable to the LNB and the corresponding antenna terminal of
the receiver card of the computer
11)
Adjust Dish, using receiver card ‘signal lock’ to watch for a signal lock
3
