Nebula Mars Lite, Руководство пользователя, Страница: 2 / 12

English
01
Table of Content
01 Safety Instructions
04 What’s Included
04 Overview
09 Get Started
11 Settings
12 Enjoy
15 Specifications
16 Troubleshooting
17 Notice
18 Trademarks
18 Warranty
Safety Instructions
Read and understand all instructions before you use this device. Do not
make any changes or settings that are not described in this manual.
If physical injury, loss of data or damage is caused by failure to follow
instructions, the warranty does not apply.
Setup
• To reduce the risk of fire and/or electric shock, do not expose the
device to rain or moisture, and objects filled with liquids, such as
vases, should not be placed on the device.
• Do not place this device on soft surfaces such as tablecloths or
carpets. Otherwise the device could catch fire.
• Do not place this device in areas susceptible to excessive dust and
dirt or near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation openings.
• Never place this device in a confined space. Always leave enough
space around the device for ventilation.
• Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture.
• When the device is running for a long period of time, the surface
becomes hot. Shut it down immediately and unplug the power cord.
Only after the device has cooled down, you can continue to operate.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the power cord.
• To avoid electric shock, do not disassemble.
• Use attachments or accessories specified by the manufacturer only.
• Avoid extreme vibrations. It may damage the internal components.
• Do not allow children to handle the device without supervision.
• Under the following conditions, a layer of moisture can appear
inside the device which can lead to malfunctions: a) if the device is
moved from a cold to a warm area; b) after a cold room is heated; c)
when the device is placed in a damp room. To avoid any moisture,
seal the device in a plastic bag before moving it to another room,
and wait for one to two hours before you take it out of the bag.