NEBRA ROCK Pi, Быстрый старт

Страница: 5 / 10

INDOOR HOTSPOT QUICK START GUIDE
This process may take slightly longer as it’ll also perform firmware updates as
soon as it gets a connection to the internet. Once it’s done you can see the
Green light led is turned on.
Figure 7: Indoor Hotspot Included
Configuring Nebra ROCK Pi Indoor Hotspot
To configure your Hotspot, you will require the Helium Network application
installed on a Mobile Phone, and for you to have gone through the account
setup process to continue.
Prerequisites
• Ready to connect nebra hotspot
• Helium application with account.
Step 1: Open the Helium application and login, then press + Add a Hotspot .
Step 2: Next click Set up Hotspot, from here you will want to select Nebra
Indoor Hotspot.
Step 3: Place your hotspot in appropriate location, please reffer Ideal
Hotspot Placement
Step 4: Accept diagnostics permission , This will allow Nebra Ltd to identify
issues with your Hotspot in a secure way
Step 5: Power Up the Nebra hotspot, and please note that never power on the
Indoor/Outdoor hotspot without it’s antenna connected as this may damage
the unit.
Step 6: Turn on mobile phone bluetooth and Push the button on the back of
the unit once to enable pairing
5 Nebra LTD. 2021