12
User Manual
15.
OPERATING ACTIVITIES
The PLASMA IQ device does not have any user replaceable parts. It also has no user replaceable fuses. In case the
device does not work, please follow the steps below:
1
Connect the charger adapter to the wall outlet.
2
Make sure that the charger LED lights up green. If the LED is not lit, check that the outlet to
which the device is plugged in is getting sufficient power. If the LED is not lit, contact
Neauvia North America customer service at 1-866-836-3113.
3
Place the device in the charger. After a while, the LED should turn red. If the LED does not
change color and the device does not work, please contact Neauvia North America
customer service at 1-866-836-3113.
4
Wait until the device is fully charged before using. The LED on the charger will turn green
when the device is fully charged.
5
Remove the device from the charger. Press the H or L on the device. The LED on the device should light
up indicating the device is ready to use.
Warning: The product is intended for use with treatment electrodes, which are disposable products.
After each treatment it is necessary to remove the electrode from the device. A new one should be
used for each treatment.
Warning: HF surgical accessories should be selected in a way to avoid incompability and unsafe
operation.
Warning: The PLASMA IQ device may only be used with Neauvia provided active electrodes.
Warning: Operator should avoid HF output settings where maximum output voltage may exceed
rated accessory voltage
Warning: Operator should regularly inspect the accessories. In particular, charger cables and HF
energized devices should be checked for possible damage.
Warning: When using the PLASMA IQ device, the rated voltage should comply with specifications in this
manual.
