4. ADJUSTMENTS
www.neatech.it
24
Footrests height
Figure 28
Unscrew the pin shown in Figure 28 to release the footrest. Choose
the desired height aligning the footrest to one of the available holes.
NOTE: For this operation use a 6 mm allen wrench and a 13 mm
open-end wrench.
Backrest depth
Figure 29
Seeing Figure 29 loosen the
screws (V), move the backrest
to the desired position and
tighten the screws again.
NOTE: For this operation use a
4 mm allen wrench.
Содержание Speedstar
Страница 4: ......
Страница 37: ...6 CONTROL AND MAINTENANCE www neatech it 32...
Страница 43: ...7 FAULT REPAIR AND ASSISTANCE...