Neatech Rehab Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 85

Neatech Rehab Series Скачать руководство пользователя страница 13

www.neatech.it

3/71

2.1

Software description

The software of the wheelchair can be categorized into these classes:

•

Kernel software of power module.

There is no required access, modification or customization of this part of the software

In case a reprogramming of the wheelchair is required, please contact the

manufacturer to have instructions and the most suitable version of the

software.

In case of problems with this part of the software please contact the

manufacturer.

•

Software parameters of the wheelchair.

This  part  of  the  software  is  made  by  the  manufacturer.  It  is  intended  to  assure  driving  and
seating function of the wheelchair. It is responsibility of the manufacturer to correct program
parameters regarding the structure of the wheelchair.
Qualified  personnel  of  an  authorized  service  center  are  able  to  customize  this  part  of  the
software to best fulfill single user requirements.

Programming must be conducted only by qualified personnel with in-
depth knowledge of the wheelchair and power module system.
Any change to this part of the software may result in a hazardous situation
for the user.

«
...
11
12
13
14
15
...
»

Содержание Rehab Series






















































































Отзывы:

Нет отзывов