Neatech EVO-1 FWD Скачать руководство пользователя страница 44

Страница: 44 / 140

www.neatech.it

33/126

USE OF THE PRODUCT

WARNING

Do not operate the wheelchair if it is behaving abnormally or erratically.

The wheelchair may come to a sudden stop at any time during operation.

WARNING

Do not stand on the product. Always use caution when transferring in or out

of the seat. Every precaution should be taken to reduce the transfer

distance. Also be certain the wheel locks are engaged to prevent the wheels

from moving.

Do not let children use the wheelchair without supervision.

INFORMATION

The product is not intended to be dismantled. There are no parts of the

product expected to be handled during normal use of it

INFORMATION

Do not install, maintain or operate the product without reading all warnings

and this entire manual.

Always keep this manual in connection with the product.

INFORMATION

The wheelchair is designed for use mostly in indoor environments.

Содержание EVO-1 FWD













































































































































Результаты поиска

Содержание EVO-1 FWD

Отзывы:

Бренды по названию

Популярные бренды

Neatech EVO-1 FWD, Руководство пользователя

Результаты поиска

Содержание EVO-1 FWD

Отзывы:

Бренды по названию

Популярные бренды