Neat D-SERVER Скачать руководство пользователя

Страница: 26 / 124

NE41 09010-02 v3.0

D-SERVER

Technical Handbook

neat

2.9.5 Extra licenses

By default a IP-DECT Server 400 can manage 12 handsets and 6 channels (simulata-

neous calls). To extend the functionality additional licenses are required.

•  License up to 30 handsets and 12 channels in a single cell structure
•  Multicell structure license
•  Combined license (12 c 30 ha Multicell License)

2.9.6 Larger systems

For larger system Spectralink offers the IP-DECT Server 6500 which supports 1024 IP-

DECT Base stations and 4096 handsets.

Picture 30.

IP-DECT Server 6500

More infomation is found here:

http://www.spectralink.com/products/dect/infra-

structure/spectralink-ip-dect-server-6500

2.10 DECT handsets

The D-SERVER system supports the Spectralink 7722 DECT handset.

2.11 NPU

The NPU is a programming unit for configuration of several NEAT units, e.g. SMILE,

ATOM, D-ATOM, D-TECT and D-CALL units.

Содержание D-SERVER





























































































































Результаты поиска

Содержание D-SERVER

Отзывы:

Похожие инструкции для D-SERVER

Бренды по названию

Популярные бренды

Neat D-SERVER, Техническое руководство

Результаты поиска

Содержание D-SERVER

Отзывы:

Похожие инструкции для D-SERVER

Бренды по названию

Популярные бренды