- 25 -
7. FAQ
Q: What loud-speaker can we use to pair with ceiling Mic A40?
A: Nearity louderspeaker ASP110 and ASP100 are available. You can also use 3rd party louder-
speaker to connect with AMX100 DSP for the audio routing.
Q: Does A40 Supported connecting with 3rd party DSP?
Q: Why I cannot find Nearity A40 in the VC software microphone list?
A: The A40 is connect to AMX100 and then do the audio routing. So we should choose AMX100
while we use the A40 system.
Q: What's the insallation height of A40 for ceiling mouting?
A: It depends on the room side. Generally we recommand to install the A40 range 2.5~3.5 meters
to the ground.
A: Does A40 Supported connecting with 3rd party DSP?
8. Caution
Do not disassemble, modify or attempt to repair the product to avoid electric shock,
malfunction or fire.
Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
Do not handle the product with wet hands to avoid electric shock or injury.
Do not allow the product to get wet to avoid electric shock or malfunction.
Do not put foreign matter such as combustible materials, metal, or liquid in the product.
Do not cover the product with a cloth to avoid fire or injury by overheating.
Keep the product out of the reach of small children. The product is not intended for use
around children.
Do not place the product near fire to avoid an accident or the product catching fire.
Do not put the product in a location where it is exposed to direct sunlight, near heating
devices, or in places with high temperatures, high humidity, or high concentrations of
dust to avoid electric shock, fire, malfunction, etc.
Keep away from a fire to avoid deformation or malfunction.
Do not use chemicals such as benzine, thinner, electrical contact cleaner, etc. to avoid
deformation or malfunction.
Although this product was designed to be used safely, failing to use it correctly may result in
an accident. To ensure safety, observe all warnings and cautions while using the product.
The product is intended for commercial use, not for general use.
Disconnect the product from a device if the product begins to malfunction, producing
smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, con-
tact your local Nearity supplier.
