NEAR 7XL, Инструкция по установке и эксплуатации

Страница: 6 / 24

0 I
OFF
7
2
Panel Descriptions
1. “Stand By” Button - Puts the amplifier into low-power consumption, or “Stand By” mode. The but-
ton will appear as back-lit Red when in “Stand By” mode.
2. Signal Clip Indicators - Summed LED read out of corresponding Input and Output.
Green - Signal is present.
Red - Clipping condition (detected at various points from input to DSP to amplifier out.
3. LCD Display - Read-out for amplifier state and preset selection.
4. Encoder/Push Button - Used to navigate the LCD screen and presets.
5. Fan Air Intake - Air intake for stepped-speed cooling fan. Fan speed responds as needed to keep
the amplifier cool, while reducing dust build-up. Fan grilles are backed by dust filters. The unit
may be vacuumed for cleaning via front panel.
1. High-Impedance Balanced Inputs - XLR female connectors allow for easy installation and
provide convenient connections to high-impedance balanced inputs. One per input channel.
2. High-Impedance Unbalanced Inputs - RCA type connectors allow for easy installation and
provide convenient connections to high-impedance unbalanced inputs. One per input channel.
3. Line Output - Line-level output. Third DSP output is available as Line Level only, either
Balanced XLR male, or Unbalanced RCA type.
4. Fan Exhaust - Air outlet for stepped-speed cooling fan.
5. Power Switch - ON/OFF Unit Power.
6. Amplifier Output Speaker Terminals - Pluggable screw terminals connect to speaker loads for
each amplifier channel. Accepts up to #12 AWG wire.
7. Ethernet Connection - Ethernet RJ45 Connector for connection to MS-Windows
®
to access
additional DSP features via a GUI-based application.
8. IEC Power Input - AC mains connection and fuse.
Rear
Panel
7 6 8
1
2
3 4
1
2 3 4 5
Front
Panel
5