Get Started
6. Cleaning
You can use the start button on the APP interface
Cleaning All
After start-up, the robot will explore and
create a real-time map of your house and
then plan the best cleaning path.
With the Neabot app, you can switch between
cleaning modes, schedule cleaning, select
room cleaning, create virtual no-go zones, set
zones to clean.
7. Recharge & Self-Empty
• Please make sure that Neabot starts cleaning from the charging station.
• Once the cleaning is done, your robot will automatically return to the self-emptying dustbin to empty its bin
and recharge as needed.
8. Sleep-Mode
If there is no operation for more than 20 minutes, the robot will automatically enter into sleep-mode.
Note:
The robot will not enter sleep-mode while charging.
• Manual charging:When the neabot is powered off, you can manually put it back into the charging
station to charge.
• The robot vacuum will return to charge automatically when the battery gets low, and resume cleaning
from where it left off until the job is complete.
Note:
It takes Neabot up to 4
-6
hours to reach a full charge. The battery will typically last 120 mins. This
also depends on the power mode you use and the floor type in your home.
Start Cleaning
！
12
