
Aydınlı Mah. Tuzla Mermerciler Org. San. Bölgesi Mermerciler Cad. No:41 Tuzla / İSTANBUL
T: 0216 593 02 42 F:0216 593 02 43
www.ndustrio.com
FILTER
Filter LED. It is a warning LED to
show that the filter is clogged (full). If
the LED is on, the filter is clogged.
(covers only the models with a filter).
END
When the drying program is
completed. The relevant LED turns
on to give a warning.
ALARM
In case of any accident, the relevant
LED is lit to give a warning to the
user. The machine does not operate
in such case.
3. MAINTENANCE
3.1. Protection
Protect your device, which will not be used for a long period, by disconnecting the power
supply.
Your device must be fed from an electrical panel that has a grounding line.
Before operating the device, check the pockets, if any, of the loaded laundry. Take care that
there are no foreign substances (coins, pens, paper tissues, cigarettes, lighters, key holders,
etc.).
Pay attention to environmental cleaning.
While you are not using your machine, make sure that no laundry is left in it. This may cause
bad smells and stains on your laundry.
3.2. Maintenance and Failure
Maintenance and failure repairs must be performed by technical personnel. Any failure repairs,
repairs and modifications made by end users on the device are extremely dangerous.
During warranty period:
only by “Authorized Service”
After the expiry of the warranty period:
by the
“Authorized Service”, “Private Service” or
“Operation Maintenance Personnel”.
Make sure to have the necessary periodical maintenance relevant to your device performed in
due time.
While performing maintenance/ repair operations on the device, absolutely do not forget to
disconnect the electrical supply.
3.3. Periodical Maintenance
Grease the roller bearings once every 400 hours in average (approximately 1 month) using the
greaser on the rear side of the device (2 presses). Over lubricating might harm the bearings
and seals. The type of lubricant recommended for your machine is written on the label on the
rear side of your machine.